10th Birthday Offer: $500 off a full fibreglass pool resurface First 10 bookings or until 31 December 2026. Request a quote · Terms
Australian Pool Resurfacing, Fibreglass Membrane Technologies 03 5975 5955 Get a quote
Menu

Home / Services

Vinyl liner conversions

Swap a stretched, creased or leaking vinyl liner for a strong, seamless fibreglass shell, with the option of new built-in steps or a ledge.

Steel-wall vinyl liner pool converted to fibreglass, filled and in useVinyl liner conversion · filled and swimming

Why convert

Fibreglass versus another liner

Stronger shell

Fibreglass adds strength to the original pool and stands up to years of use.

No stretching or folds

Liners stretch and crease over time, which leads to damage and water loss. Fibreglass doesn't.

Repairs that blend in

Fibreglass is hard to damage, and if it is damaged it can be repaired to blend in. That's hard to do with a liner.

Long life

The colour will slowly fade like any finish, but the fibreglass stays mechanically strong.

Is my pool suitable?

What we check at inspection

Most vinyl-lined pools have either cement-sheet or steel walls, with a concrete or sand floor. Fibreglass has to bond to something solid.

  • Cement-sheet or concrete walls on a concrete floor: usually suitable for conversion.
  • Thin steel or tin walls on a sand base: usually not suitable as they are, because there's no solid floor once the liner comes out.
  • Sand floor, but you want to convert: if a concreter pours a new floor first, we can then fibreglass the floor and walls.

Send us a photo of your pool, including under the coping where the liner track sits, and we can usually tell you straight away.

See every step of the process

A real conversion

From vinyl liner to fibreglass

A steel-wall vinyl liner pool we converted. The floor was concreted first, then the whole pool was fibreglassed and finished in gelcoat.

Vinyl liner pool with the liner removed and a new concrete floor poured
Liner out, new concrete floor
The same pool after fibreglassing and gelcoat, ready to fill
Fibreglass and gelcoat complete
The converted pool filled and in use
Filled and swimming

Questions

Common questions

Can every vinyl liner pool be converted?

Not every one. Fibreglass needs a solid surface to bond to. Liner pools with cement-sheet or concrete walls on a concrete floor are usually suitable. Pools with thin steel or tin walls sitting on a sand base usually can't be converted as they are, because there's no solid floor once the liner comes out.

What if my pool has a sand floor?

If a concreter pours a new concrete floor after the liner is removed, we can then fibreglass the floor and walls. We'll explain the options at inspection.

Is fibreglass better than a new liner?

Fibreglass is stronger, doesn't stretch or crease, and can be repaired so the fix blends in. A liner usually needs replacing again within years.

Can you add steps when converting?

Yes. A conversion is a good time to add built-in steps or a ledge.

Find out what your pool needs

Free inspection, Pool Condition Report and fixed written price.

Our preferred suppliers and partners